Shop Now
    Menu Close

    Bathroom Butler Natural 5 Bar 500 mm Straight PTS Champagne Gold

    Manufacturer: Bathroom Butler
    Bathroom Butler Natural 5 Bar 500 mm Straight PTS (Champagne Gold)
    SKU: 10-HN-S5221CG
    Manufacturer part number: NAT05221-PTS-BCGD
    Old price: R 6 906.00 incl VAT
    R 6 835.00 incl VAT
    i h

    Our most popular heated towel rail at 500 mm wide with classic round, evenly spaced bars is ideal for smaller bathrooms and has the capacity for 2 bath sheets. Fitted with a rotary manual switch giving you the freedom to switch on and off and adjust the temperature at your convenience.

    Towels dried on a Bathroom Butler heated towel rail are up to 90% more hygienic compared to air-drying and therefore don’t need to be washed every day, significantly reducing your water and electricity usage.


    Dry towels mean less bacteria. Our heated towel rails are designed specifically for this purpose. Using the technology of Rapid Heating, our rails reach optimum drying temperature within 10 to 15 minutes and towels dry within 4 to 5 hours when folded into four layers, trapping the heat underneath the towels, resulting in 90% less bacterial build up. The energy usage of this rail is equivalent to that of a 65 watt light bulb. Less laundry washes, more savings.

    Towel Holding Capacity: This model has the capacity to dry 2 x folded bath sheets

    Heated and Drying Times: 

    • Heated Towel Rail to Heat-Up: 10 – 15 mins
    • To add a touch of warmth to a dry towel: 30 – 45 mins (when folded correctly in four layers)
    • To dry an average used, damp towel: 4 – 5 hours (when folded correctly in four layers)

    Estimated Running Cost: R52/month* (*Electricity costs calculated according to July 2020 COJ rates average cost R1.48/kwh. Based on running time 24/7 at 75% setting)

    Built-In Controller: The discreetly built-in PTSelect (Personal Temperature Selection) Switch will enable you to switch the heated towel rail on and off as well as adjust the temperature to suite your personal heat preference.

    Electrical Wiring: This electric towel rail is hardwired and the electrical connection must be completed by an electrician. This product has a Dual-Entry electrical connection which means it has both LEFT and RIGHT electrical connections, and can be connected to any of the two sides straight out of the box to better suit your electrical point.

    Material: Grade 304 Stainless Steel
    Stainless Steel has a natural resistance to corrosion and therefore does not require a protective coating which makes this product ideal for the bathroom environment. The shiny polished Stainless Steel finish is often confused with a Chrome finish, however the two could not be more different. While stainless steel will not peel or flake, chrome products on the other hand are susceptible to chipping and pitting due to the nature of a coated surface.

    Cleaning and Care: To keep the product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also on occasion, use a Chlorine-free stainless steel cleaner to maintain the gorgeous shine. If you use a stainless steel polish, make sure it is abrasive free. When cleaning wall surfaces around your heated towel rail make sure not to use any household detergents that contain Chlorine-based chemicals such as bleach, this will cause permanent damage to the surface of the stainless steel.

    What’s in the box: 
    Heated Towel Rail
    Mounting kit which includes masonry wall fasteners [Fischer UX 6mm Plastic Plugs and Screws (2 pieces), Fischer UX 8mm Plastic Plugs and Screws (3 pieces)]
    Installation Instructions (1 piece)
    Mounting template (1 piece)

    Tools needed (not supplied): 
    Drill & Drill bits

    • 6mm and 8mm Diamond drill bit – if drilling through Ceramic tiles
    • 6mm and 8mm Masonry drill bit – if drilling into Masonry (Brick)

    Measuring tape
    PH2 screwdriver
    Spirit level

    Installation Tip: 

    • Check for water pipes before drilling
    • In Masonry walls, always drill a smaller pilot hole first for better accuracy regarding location and sizing


    Heated Towel Rails Specs:
    Model: NAT05221-PTS
    Size: 524mm (width) x 735mm (height) x 109mm (depth)
    Power: 65 Watts
    Current: 0.28 Amps
    Volts: 230 VAC
    IP Rating: IPX5

    Time Needed for Heated Towel Rail to Reach Optimum Temperature: 10 - 15 mins
    Time Needed to add a touch of warmth to dry towels: 30 -40 mins (when folded correctly in four layers)
    Time Needed to dry an average used damp towel: 4 – 5 hours (when folded correctly in four layers)
    Suggested Height of Electrical Outlet = 1050mm (this is only an indication as every installation is different)
    Standard Finishes Available: POLISHED Grade 304 Stainless Steel / MATT Black

    Controller Specs:
    Controller: PTSelect Switch
    Features: Temperature Adjustment + ON / OFF Switch + RED LED Indicator
    INPUT Voltage Range: 190VAC~250VAC
    Operating Frequency: 50 Hz ±2%
    Load Capability: 0.18A~4A
    Load Control Range: 40~100%
    Standby Current: 3.0mA